Fix BSOD (Blue Screen Of Death) issue when using zero clients as endpoints

Fix BSOD (Blue Screen Of Death) issue when using zero clients as endpoints


While using zero clients as an endpoint in the Monitors AnyWhere system, we've encountered several occasions where the Windows operating will fail and show the BSOD screen (Blue Screen of Death). After many investigations, we've managed to allocate the issue and found a solution for it.


1. Uninstall the current 'Network USB Utility' application that you are using and restart your system.
Sometimes it may require to restart the system twice. 

2. Download and extract the version of the 'Network USB Utility' from this link:

3. Install it and restart again. 

That should solve the BSOD issue in your system.

    • Related Articles

    • In the Network USB Utility the Connection will go from This PC to Free

      If you are using the MAWi Zero connectivity option and you've upgraded your Windows to a newer build or had to re-install the OSBASE drivers, you might be having an issue with the screens that will stop working. When you open the Network USB Utility, ...
    • How can I configure the Zero Clients with a Static IP Address

      If you have a DHCP server in your network you can simply connect all the zero clients to the network. Install the osBase drivers and the Network USB Utility on your control PC as per our installation guide . Start the 'Network USB ...
    • Quick Installation Guide – MAWi ZERO

      Quick Installation Guide  MAWi ZERO     MAWi platform consists of a single ‘MAWi Server’ installation, that can control multiple ‘MAWi Agent’ instances.  MAWi Agent is installed on a PC or a VM that is connected to single or multiple screens that you ...
    • How to update Zero Client firmware

      1. Download the latest firmware according to the brand and model of your zero client using this link and unzip the file Latest firmware update 2. Start the 'Network USB Utility'. Before assigning the zero client to the PC (Assignment must show ...
    • Using HYPER-V, Zero Clients keeps on disconnecting

      Our system requires continuous connectivity between the host PC/VM and the zero clients. Since the default configuration for Hyper-V is usually set to Shared, that can cause issues as you've encountered. In those cases, I would recommend changing the ...